SB2T Tubbuddy with Tilt

SB2T Tubbuddy with Tilt Images

SB2T TubBuddy for your BathTub with Tilt

SB2T Tubbuddy with Tilt


No Reviews Leave a Review

 This solution ships complimentary FedEx ground. Please call for expedited shipping options.

The TubBuddy with Tilt SB2T transfer system will turn your existing bath tub into an accessible bathroom that allows you to enjoy showering again without the excessive cost, delay and stress of a full bathroom remodel.

 The TubBuddy with Tilt SB2T alleviates heavy lifting and multiple transfers for toiling and showering.  This chair is separated into three sections; rolling base (shower chair), bridge and tub base.  The rolling base rolls around the house like a wheelchair allowing patient to easily transfer and then roll right over most toilets.  Once completed with toiling the rolling base connects to a bridge and then onto the tub base allowing the chair to slide in a tilt position over the tub. Once over the tub the bridge disconnects allowing the curtain to close .


  • The TubBuddy with Tilt SB2T allows the chair to tilt while transferring over the tub preventing the caregiver lifting the patients legs over the tub.
  • The system is made of aluminum which will not rust when in contact with water.
  • Height adjustability on rolling base and tub base- allowing for use in a variety of tubs.
  • Rolls over some toilets- allowing for “no mess” alternative to commode usage. 
  • Custom bridge sizes are available- allowing for use in a variety of bathroom sizes.

 Dealer SB2t Quote

Shipping Cost
Calculated at Checkout
Weight Limit
350 lbs (160kg)
Total Length When Tilted
Rolling Base (w x D)
19.3” x 33” (490mm x 840mm)
Rolling Base w/ Footrests (W x D)
19.3” x 43.3” (490mm x 1100mm)
Outer Armrest Width
22.5” (570mm)
Inner Armrest Width
18.7” (475mm)
Width Inside Main Legs
400mm (15.7”)
Backrest Width
18" (460mm)
Back Rest Height from Cushion
17” (440mm)
Toilet Height Clearance (maximum)
19.4” (495mm)
Standard Bridge Length (Can Be Customized)
11.8” (300mm)
Seat Cushion WxD
17.7” x 16.5” (450 x 420mm)
Seat Cushion Height from Floor
24.8” – 28.8” (630mm - 730mm)
Seat Cushion Opening W x D
6.8” x 13” (175mm x 335mm)
Tub Base (at top) W x D
19" x 13” (480mm x 330mm)
Tub Base (at bottom of legs) W x D
(335 x 735mm) 13.2” x 29"
Tub Base (side stabilizers)
16.7” – 28.3” (425mm – 720mm)
Tilt Angle
0 – 30 Degrees, Infinite Positioning
Removable / Lockable / Flip-back
Height Adjustable
Frame Material
Corrosion resistant Aluminum frame (Grade 6061 T6)
Misc. Parts
Stainless steel parts and hardware (Grade 304)
Safety Belts
Lap & Chest Belts
Caster Wheels
5” (125mm) , Lockable
Removable Commode system
81.00 LBS

2 Year Limited Warranty: Showerbuddy warrants our Showerbuddy Solutions and all Showerbuddy products for two years from the date of purchase by the consumer. The warranty will only become active once the consumer submits the warranty registration card to the company with a copy of the purchase receipt. This warranty covers defects in materials and workmanship on all Showerbuddy products.


-Product or parts failure from normal wear and tear
-Damage caused by failure to adhere to the User’s Manual
-Damage from improper installation, use or repair
-Brake line that operates the handbrake / tilt mechanism on tilting chairs (SB2T and SB3T)
-Improper use of the hand ratchet that is used in adjusting the neck support / adjustment
-Seat cushions and arm rests


-The warranty is VOID if the original serial number tag is removed or altered.
-The warranty is VOID if the unit sustains damage from unnatural causes.
-The warranty is VOID if the unit is used to hold more than the weight limit of 300 pounds (140kg).
-The warranty is VOID if the unit has been subjected to neglect, improper maintenance, storage, cleaning or operation as defined in the User’s Manual.
-The warranty is VOID if the unit is modified without Showerbuddy’s written consent.
-This warranty applies to the original purchaser only, from the date of the purchase, provided a registration card has been submitted to the company within 60 days of purchase.


If your unit requires warranty service, please contact the dealer from which you purchased the Showerbuddy unit. If you do not receive satisfactory dealer service, contact Showerbuddy directly. Do not return the unit to Showerbuddy without first obtaining a Return Authorization Number from Customer Service. A defective unit must be shipped to Showerbuddy within 14 days of issuance of a Return Authorization Number by Customer Service.


Showerbuddy’s sole responsibility is to repair or replace, at their discretion, the covered components of the unit. This is the exclusive remedy for consequential or incidental damages. Upon pre-approval, Showerbuddy may provide exchange services for Warranty returns. Under this program, a refurbished Showerbuddy unit may be shipped after the return of the defective unit. The exchange unit may contain used parts that meet Showerbuddy quality standards. This program is provided at the sole discretion of Showerbuddy. The original warranty term will not be extended due to such a unit exchange and a return unit will become the property of Showerbuddy.


For hygienic reasons, this item is non-returnable.


0 based on 0 reviews.
Leave a Review

Sorry, there are no reviews for this product yet.